| PART |
Description |
Maker |
| AT24CS16-14 |
Factory Programmed 128-bit Serial Number
|
ATMEL Corporation
|
| UPG2214TB-E4-A |
50 MHz - 3000 MHz RF/MICROWAVE SGL POLE DOUBLE THROW SWITCH, 0.65 dB INSERTION LOSS
2-WIRE FACTORY PROGRAMMED W/TIN PLATING
NECs W LOW VOLTAGE L/ S-BAND SPDT SWITCH
NECs ?W LOW VOLTAGE L, S-BAND SPDT SWITCH
|
NEC Corp.
|
| TC6502 TC6504P005VCT TC6501 TC6501P115VCT TC6501P1 |
The TC6501 through TC6504 are SOT-23 temperature switches that require no external components and the design is facilitated with factory programmed temperature thresholds. A choice of factory-trimmed temperature trip points are available.
From old datasheet system
(TC6501 - TC6504) Ultra Small Temperature Switches with Pin Selectable Hysteresis
Ultra Small Temperature Switches with Pin Selectable Hysteresis 超小型温度开关，引脚可选择迟滞
|
MICROCHIP[Microchip Technology]
Microchip Technology, Inc.
|
| TC53 TC53N3002ETR TC53C1802CTTR TC53C1802ETR TC53C |
The TC53 is a low power voltage detector. Typical supply current consumption is only 1A at an input voltage of 2V. The voltage detection threshold setting is factory-programmed and guaranteed to ±2% accuracy. Threshold settings are a
|
MICROCHIP[Microchip Technology]
|
| MAX270 MAX270CPP MAX270CWP MAX270EPP MAX270EWP MAX |
Digitally-Programmed, Dual 2nd-Order Continuous Lowpass Filters
|
MAXIM INTEGRATED PRODUCTS INC
MAXIM - Dallas Semiconductor
MAXIM[Maxim Integrated Products]
Maxim Integrated Products, Inc.
|
| MAX741UC_D MAX741UCAP MAX741UCPP MAX741UEAP MAX741 |
Pin-Programmed, Low-Voltage, Current-Mode SMPS Controller
|
MAXIM[Maxim Integrated Products]
|
| E8404A |
100-500MHz Dual Channel, Digitally Programmed Pin Electronics Solution
|
Semtech Corporation
|
| ADIS16490 ADIS16490BMLZ |
Factory calibrated sensitivity
|
Analog Devices
|
| RT5028B |
Embedded 32Bytes MTP for Factory Tuning
|
Richtek Technology Corp...
|
| R191-052-000 |
Enclosures can be Factory Modified ( Milling, Drilling, Printing etc. )
|
Hammond Manufacturing L...
|
| R190-170-000 |
Enclosures can be Factory Modified ( Milling, Drilling, Printing etc. )
|
Hammond Manufacturing L...
|
